Section IV. CONFIGURATION ROUTINES

Alarms Recall Routine - Continued

Use of Configuration Routines.

TM-11-7025-221-10 Multiplexer Digital TD-1337(V)1/G TD-1337(V)2/G TD-1337(V)3/G TD-1337(V)4/G Manual
Page Navigation
88

TM 11-7025-221-10

Section IV. CONFIGURATION ROUTINES

Page

Para

Subject

2-51

2-22

Use of Configuration Routines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-52

2-23

Data Requirements for Generate Routines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-55

2-24

Generate Orderwire Configuration Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-57

2-25

Display Orderwire Configuration Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-58

2-26

Display System Configuration Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-59

2-27

Generate Local Mux Configuration Routine (V1/V2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-68

2-28

Generate Local Mux Configuration Routine (V3/V4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-76

2-29

Generate Rmux Minimum Configuration Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-80

2-30

Generate Rmux Configuration for Downloading Routine (V1/V2) . . . . . . .. . . . . . . . . . . . .

2-88

2-31

Generate Rmux Configuration for Downloading Routine (V3/V4) . . . . . . . . . . . . . . . . . . . . . . . . .

2-96

2-32

Edit Existing Configuration Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-99

2-33

Continue Configuration Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-34

2-100

Download Standby Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-101

2-35

Download Local Configuration Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-102

2-36

Download to Non-Nodal Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2-104

2-37

Receive Control Telemetry Configuration Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

OVERVIEW

This section contains the above listed routines. These routines are used by an operator to generate, display,

transmit, and receive configuration data as described below. The routines are used as described in paragraph

2-22. Paragraph 2-23 describes the data you require to perform a generate routine,

Generate Routines. These routines are used by the operator to enter configuration data in the

NVM, One or more of the routines in paragraphs 2-24, and 2-27 through 2-31, are required to

configure the TD- 1337(V)/G for operation as described in paragraph 2-22.

Display Routines. If you want to display the orderwire configuration data entered in the NVM, perform

the routine in paragraph 2-25. To display the configuration data in memory 1 or memory 2 area

in NVM, perform the routine in paragraph 2-26.

Transmit Routines. The routine in paragraph 2-34 is used to download configuration data in your

TD-1337(V)/G to a standby TD-1337(V)/G. Perform the procedures in paragraph 2-35 to send your

local mux configuration to each remote TD-1337(V)/G in your network. Use paragraph 2-36 to transmit

a Rmux configuration for downloading to a selected remote TD-1337(V)/G in your network.

Receive Routine. When a remote TD-1337(V)/G has transmitted configuration data to your TD-

1337(V)/G (remote operator would use routine in paragraph 2-35 or 2-36), use the routine in paragraph

2-37 to accept or abort the received configuration data.

Edit and Continue Routines. These routines allow the operator to edit and continue configuration

routines as described in paragraph 2-22.

2-50

Privacy Statement
Press Release
Contact