TM 11-7025-221-10
2-37. Receive Control Telemetry Configuration Routine.
Perform the following procedures to accept or abort a download local configuration or a download to non-nodal
transmission from a remote TD-1337(V)/G. This procedure is performed when ALARM horn sounds and
a "T" appears on upper right-hand corner of display.
NOTES
When a download local configuration is accepted, configuration
data is entered in memory 1 or memory 2 for the demux that
received the SG containing the transmission.
When a download to non-nodal transmission is accepted, con-
figuration data is entered in memory 1 or memory 2 for the local
mux and one demux.
When a message is displayed that you do not understand, go
1337(V)/G are listed in alphabetical order. The operator action
associated with each display is described in the paragraph.
Start with step 1 and perform the action in the procedures as
directed. Messages that appear on the display are shown in bold
type.
Receive Control Telemetry Configuration Routine
Step
Operator action/message display
1
Press FUNC key (one or two times) until SELECT FUNCTION is displayed. Then press CT
key.
2
Message B
NOTES
q Message A is displayed when a download local configuration transmission
is received.
q Message B is displayed when a download to non-nodal transmission "is
received.
Press "1" (accept) or "2" (abort) key and then press ENTR key.
2-104