TM 11-7025-221-10
2-34. Download Standby Routine - Continued.
Download Standby Routine - Continued
Step
Operator action/message display
3
Press "1" key and then press ENTR key.
I
4
Check that PLEASE STAND BY message is displayed and then TRANSMIT COMPLETE message
is displayed.
I
Routine is complete. Press CLR key to clear display.
5
2-35. Download Local Configuration Routine.
Perform the following procedures to transmit the local 0mux configuration data in memory 1 or memory
2 to all remote TD-1337(V)/G's that receive your SG. This data is used by each remote TD-1337(V)/G
to configure its demux that receives your SG.
NOTES
q When a message is displayed that you do not understand, go
to paragraph 2-6. All messages that can be displayed on TD-
1337(V)/G are listed in alphabetical order. The operator action
associated with each display is described in the paragraph.
q Start with step 1 and perform the action in the procedures as
directed. Messages that appear on the display are shown in bold
type.
Download Local Configuration Routine
Step
Operator action/message display
1
Press FUNC key (one or two times) until SELECT FUNCTION is displayed, Then press SYSTEM
CONF key.
2
Press "3" key and then press ENTR key.
2-101
