TM 11-7025-221-10
2-35. Download Local Configuration Routine - Continued.
Download Local Configuration Routine - Continued
Step
Operator action/message display
3
Press "2" key and then press ENTR key.
4
Press "1" or "2" key and then press ENTR key. (Select memory 1 or memory 2 as directed
by authority originating transmission.)
5
Check that PLEASE STAND BY message is displayed and then TRANSMIT COMPLETE message
is displayed,
6
Routine is complete. Press CLR key to clear display.
2-36. Download to Non-Nodal Routine.
Perform the following procedures to transmit a Rmux configuration for downloading to one remote TD-
1337(V)/G that is operating as a non-nodal. You can select and transmit a configuration to any remote
TD-1337(V)/G in your network that has an assigned call number,
NOTES
q When a message is displayed that you do not understand, go
to paragraph 2-6. All messages that can be displayed on TD-
1337(V)/G are listed in alphabetical order. The operator action
associated with each display is described in the paragraph.
q Start with step 1 and perform the action in the procedures as
directed. Messages that appear on the display are shown in bold
type.
Download to Non-Nodal Routine
Step
Operator action/message display
1
Press FUNC key (one or two times) until SELECT FUNCTION is displayed, Then press. SYSTEM
CONF key.
2-102
