TM 11-7025-221-10
2-33. Continue Configuration Routine.
Use this procedure to continue a configuration routine that was interrupted before you completed it. This
continue routine allows you to advance through the configuration steps without affecting information already
entered in the configuration routine. Before using this routine, ensure that you have the information required
to complete the configuration routine.
NOTES
q When a message is displayed that you do not understand, go
to paragraph 2-6. All messages that can be displayed on TD-
1337(V)/G are listed in alphabetical order. The operator action
associated with each display is described in the paragraph.
q Start with step 1 and perform the action in the procedures as
directed. Messages that appear on the display are shown in bold
type.
Continue Configuration Routine
Step
Operator action/message display
1
Press FUNC key (one or two times) until SELECT FUNCTION is displayed. Then press SYSTEM
CONF key.
2
Press "2" key and then press ENTR key.
3
Press "2" key and then press ENTR key.
4
Press "1" or "2" key (select memory area containing configuration data to be continued) and
then press ENTR key.
2-99
