TM 11-7025-221-10
2-6. List of Message Displays Continued.
Message Displays - Continued
Description
Message displayed
Message is displayed for approximately two
RING BUSY
seconds when make orderwire call routine
is performed.
Message is displayed to indicate that ring signal
RING COMPLETED
is transmitted to remote party being called.
(Message appears after RING BUSY message
is blanked.)
RMUX
# Enter "1" when generate Rmux minimum
CONFIGURATION SELECT >
configuration routine is being per-
MINIMUM CONFIGURATION=1
formed. Enter "2" when Rmux configuration for
CONFIGURATION FOR DOWNLOADING =2
downloading to non-nodal routine is being per-
formed,
This message indicates that port rate for
RMUX PORT RATE INVALID FOR
local port identified in message is not
LOCAL PORT
the same rate entered for its associated remote
MEMORY LOAD ABORTED
port in demux. Either a wrong rate was entered
when performing routine or incorrect configura-
tion data was supplied. Routine being performed
is automatically aborted.
# Message indicates that a download local
configuration transmission has been re-
ceived from a remote TD-1337(V) G. Message
also displays which demux (1 through 4) in
memory 1 or memory 2 is to be configured and
system mode in which local TD-1337(V)/G is op-
erating, Enter "1" if configuration is to be ac-
cepted or enter "2" if configuration is to be
aborted.
NOTE
You cannot accept a download trans-
mission for a given memory if you are
operating in that memory mode. In this
case, place local TD-1337(V)/G in an-
other operating mode (system mode
change routine) and repeat receive
control telemetry routine.
t
SELECT FUNCTION
Select operating or configuration routine to be per-
formed by pressing one of SYSTEM or
ORDERWIRE keys or CT key. (Only appears
after FUNC key is pressed. )
2-21
