TM 11-7025-221-10
2-6. List of Message Displays - Continued.
Message Displays - Continued
Description
Message displayed
Message is displayed when download standby
TRANSMIT UNSUCCESSFUL
routine cannot be completed. Check that standby
STANDBY OFF LINE
TD-1337(V)/G is turned on and operating in in-
active mode.
I
#
Message is displayed when generate
TRM#/CALL#/SECURE=1,NON-SEC=2
LOCAL TD >
orderwire configuration routine is
/
/
/1
/
LOCAL CNCE =
performed. At each entry point designated
by prompt, enter:
1. Local TD-1337(V)/G terminal number, call
number, and secure ("1") or non-secure
("2") mode.
2. Local CNCE terminal number and call
number. CNCE automatically assigned a
secure mode ("1" is displayed).
Message is displayed for information when
display orderwire configuration routine is per-
formed.
I
TRM#/CALL#/SECURE=1,NON-SEC=2
#
Message is displayed when generate
REMOTE
>
/
/
orderwire configuration routine is
/ /1
REM CNCE =
performed. Message is repeated for each
remote TD-1337(V)/G in network. At each
entry point designated by prompt, enter:
1. Remote TD-1337(V)/G terminal number,
call number, and secure ("1") or non-
secure ("2") mode.
2. Remote CNCE terminal number and call
number. Remote CNCE automatically as-
signed a secure mode ("1" is displayed).
. Message is displayed for information when
display orderwire configuration routine is per-
formed. Message is repeated for each
remote TD- 1337(V)/G in network.
NOTE
Above message only displayed once
for V2 and V4 models since they can
communicate with only one remote TD-
1337(V)/G.
One of message headings that appear when
alarms recall routine is performed. Heading can
be followed by lines of diagnostic information.
Refer to paragraph 2-21 for further description.
2-24
