TM 11-7025-221-10
2-6. List of Message Displays-Continued.
Message Displays - Continued
Description
Message displayed
SELECT FUNCTION
Message is displayed when a transmit config-
TRANSMIT ABORTED
uration routine has been aborted by the
operator.
>
SLAVE TIMING SOURCE
# Enter number (1 to 4) of demux receiving
DEMUX 1=1 2=2
3=3
4=4
SG from remote TO- 1337(V)/G selected as tim-
ing source.
NOTE
This message is only displayed in V1
and V3 models.
STATUS DISPLAY SELECTION
Enter number (1 to 4) to select one of
>
COMP RATE=1 VCXO=2 DSPL TEST=3
status display selection routines.
ALARM INHIBIT=4
NOTE
VCXO status display routine (VCXO= 2)
can only be selected and displayed
when TD-1337(V)/G is using CNCE or
external standard as a timing source.
MODE
SYSTEM IS IN
Press CLR key to terminate display system
STEP IF SYSTEM MODE CHANGE IS
mode routine or press STEP key to con-
DESIRED, OTHERWISE CLEAR
tinue system mode change routine.
SYSTEM MODE CHANGE COMPLETE
Message is displayed when system mode
change routine is completed. TD-1337(V)/G
is now operating in new mode.
# Enter number (1 to 5) to select mode of
operation in which TD-1337(V)/G will
be operated when system mode change routine
is completed.
NOTE
"TD-976=5" is only displayed in V1
model.
TD-754 DEMUX OPTION
# At each port designated by prompt, enter
INACTIVE=0 ACTIVE= 1
"1" if port is to use TD-754 demux option.
PORT 1>
PORT 3=
Otherwise, enter "0".
NOTE
This message is only displayed in V1
and V2 models.
2-22
