TM 11-7025-221-10
2-27. Generate Local Mux Configuration Routine (V1/V2 Models) - Continued.
Local Mux Configuration Data Requirements (V1/V2 Models) - Continued
Step
Message heading]
Definitions
No.
data required
Enter "0" if option is not used or "1" if
10
16KBS ORDERWIRE OPTION
option is used.
Entry:
_
Enter "0" if option is not used, "1" if option
11
16/32 KBS USER OPTION
is used and rate is 16 kb/s, or "2" if option
is used and rate is 32 kb/s.
Entry:
__
Enter number of demux ("l", "2", "3", or
12
16/32 KBS USER DEMUX
"4") receiving SG containing data for dedi-
cated user.
Entry:
_
NOTES
. Step not used if "0" entered in step 11.
. Step not used in V2 model. ("1" is automatically
entered if "1" or "2" was entered in step 11.)
13
PORT OUTPUTS, DEMUX/PORT
Following entries are made for each active
port output.
(a)
(b)
Port
1,
Demux
_
/
Port
_
a. Demux number ("l", "2", "3", or
Port
2,
Demux
_
/
Port
--
"4") of demux supplying data to that
Port
3,
Demux
_
/
Port
--
port output.
Port
4,
Demux
_
/
Port
--
Port
5,
Demux
_
/
Port
--
b. Port number ("1" thru "8") of group
Port
6,
Demux
_
/
Port
--
data that will be extracted from SG
Port
7,
Demux
_
/
Port
--
applied to selected demux (a above) and
Port
8,
Demux
_
/
Port
_
routed to your port output. (This is port number
of Rmux port supplying selected group data in
SG.)
NOTE
Ports 3 thru 8 not used in V2 model.
TIMING SOURCE SELECTION
14
Enter "1" for CNCE or external standard,
"2" for slave, or "3" for master.
Entry:
2-61
