TM 11-7025-221-10
2-27. Generate Local Mux Configuration Routine (V1/V2 Models) - Continued.
Local Mux Configuration Data Requirements (V1/V2 Models) - Continued
Message heading/
Step
No.
data required
Definitions
PORT RATES IN KBS
At each port, enter port rate in kb/s or "0"
6
if port is inactive.
Port 5 --
Port 1 _
NOTE
Port 6 _
Port 2 --
Port 7 --
Port 3 --
Ports 3 thru 8 not used in V2 model.
Port 8 --
Port 4 --
Enter one of following for each active port.
7
PORT INTERFACE
,
"1" for balanced
Port 4 --
Port 1 --
"2" for conditioned diphase
Port 2 _
Port 5 _
"3" for unbalanced
Port 3 _
NOTES
q Ports 3 thru 8 not used in V2 model.
q Ports 6, 7, and 8 are automatically entered as
balanced ("1") when active.
For each port, enter "0" if option is not used
8
TD-754 DEMUX OPTION
or "1" if option is used.
Port
3
_
Port
1
_
NOTE
Step 8 is only used for port 1 and/or port 3 when:
a. For port 1 when ports 1 and 2 have port rates
of 576 kb/s and an unbalanced interface.
b. For port 3 when ports 3 and 4 have port rates
of 576 kb/s and an unbalanced interface.
For each port, enter "0" if option is not used
9
TD-754 MUX OPTION
or "1" if option is used.
Port 7
--
Port
5
_
NOTES
q Step 9 is only used for port 5 and/or port 7
when:
a. Port 5 has a port rate of 1152 kb/s and a.
balanced interface.
b. Port 7 has a port rate of 1152 kb/s and a
balanced interface.
q Step 9 is not used in V2 model.
2-60
