TM 11-7025-221-10
2-27. Generate Local Mux Configuration Routine (V1/V2 Models) - Continued.
Local Mux Configuration Routine (V1/V2 ModeIs) - Continued
Step
Operator action/message display
13
PORT OUTPUTS, DEMUX/PORT
1> /
2=1 3=/ 4=/
6=/7=/8=/
5= /
At each port selected by prompt, perform substeps a and b below.
NOTE
Substep a below selects which demux (1 thru 4) is assigned to selected
port output. Substep b then selects which group data (Rmux port) will be
extracted from SG applied to selected demux and routed to your port output.
a. Press
key and then press ENTR key.
b. Press
key and then press ENTR key.
14
TIMING SOURCE SELECTION >
IF CNCE OR EXTERNAL STANDARD= 1
IF NOT, SLAVE=2 MASTER=3
Press
key and then press ENTR key.
NOTES
If "1" key was pressed, go to step 15.
If "2" key was pressed, go to step 16 (V1 model) or step 17 (V2 model).
If "3" key was pressed, go to step 17.
EXTERNAL TIMING SOURCES
15
CNCE OR EXT STD PORTS=1 OTHERS=0
1> 2= 3= 4= 5=
6=
7=
8=
At each port selected by prompt, press
key and then press ENTR key, Go to step 17.
2-66
