TM 11-7025-221-10
2-27. Generate Local Mux Configuration Routine (V1/V2 Models) - Continued.
Local Mux Configuration Routine (V1/V2 Models) - Continued
Step
Operator action/message display
NOTE
Go to step 10 if following message is not displayed. (Step 9 is performed
when port 5, port 7, or both ports are assigned port rates of 1152 kb/s
and interface is balanced. Step 9 not used in V2 model.)
9
At each port selected by prompt, press v key and then press ENTR key.
10
Press v key and then press ENTR key.
11
Press v key and then press ENTR key.
NOTE
Go to step 13 if following message is not displayed. (Message is not displayed
if "0" entered in step 11 or you are using a V2 model.)
12
Press
key and then press ENTR key.
2-65
