TM 11-7025-221-10
2-17. Composite Rates Display Routine - Continued.
Composite Rates Display Routine - Continued
Operator action/message displayed
Step
5
DEMUX2 thru DEMUX4 portion
of message not displayed
Press STEP key to advance to next display.
on V2 and V4 models.
6
Observe that above message is displayed.
Press CLR key to clear display.
2 - 1 8 . VCXO Status Display Routine.
Perform the following procedures to display the VCXO (voltage-controlled oscillator) status. This procedure
can only be performed when an external timing source is being used. These procedures can be performed
without affecting normal equipment operation,
NOTES
When a message is displayed that you do not understand, go
to paragraph 2-6. All messages that can be displayed on TD-
1337(V)/G are listed in alphabetical order. The operator action
associated with each display is described in the paragraph.
Start with step 1 and perform the action in the procedures as
directed. Messages that appear on the display are shown in bold
type.
VCXO Status Display Routine
Step
Operator action/message displayed
I
1
Press FUNC key (one or two times) until SELECT FUNCTION is displayed. Then press SYSTEM
STAT key.
2
Press "2" key and then press ENTR key.
2-41
