TM 11-7025-221-10
2-17. Composite Rates Display Routine.
Perform the following procedures to display the composite rate assignments. This routine includes the com-
posite rate for the local mux supergroup output and the composite rate for the supergroup input to each
active demux. The composite rate assignments for the preliminary, memory 1, and memory 2 modes are
displayed in the routine. These procedures can be performed without affecting normal equipment operation.
NOTES
When a message is displayed that you do not understand, go
to paragraph 2-6. All messages that can be displayed on TD-
1337(V)/G are listed in alphabetical order. The operator action
associated with each display is described in the paragraph.
Start with step 1 and perform the action in the procedures as
directed. Messages that appear on the display are shown in bold
type.
Composite Rates Display Routine
Step
Operator action/message displayed
1
Press FUNC key (one or two times) until SELECT FUNCTION is displayed. Then press SYSTEM
STAT key.
2
Press "1" key and then press ENTR key.
3
PRELIM * COMPOSITE RATE IN KBS
MUX= *
DEMUX2= *
DEMUX1 =*
DEMUX3=*
DEMUX4=*
STEP
I
DEMUX2 thru DEMUX4 portion
Press STEP key to advance to next display.
of message not displayed
on V2 and V4 models.
4
MEMORY 1 COMPOSITE RATE IN KBS
DEMUX1 =
MUX=
DEMUX2=
DEMUX3=
DEMUX4=
STEP
DEMUX2 thru DEMUX4 portion
Press STEP key to advance to next display.
of message not displayed
on V2 and V4 models.
2-40
