TM 11-7025-221-20
2-21. Front Panel Removal and Installation Instructions - Continued.
Location/Item
Action
Remarks
Installation
7. Gasket (10)
Inspect
Perform following checks and notify next
higher level of maintenance of any prob-
lems.
1. Check that there are no rips, tears,
or missing chunks in gasket.
2. Check that bonded surface of gas-
ket has not pulled away from case.
8. Front panel (9)
Support front panel near TD-
1337(V)/G using two persons,
9. 3 connectors (6,
Connect
A23P1 (6) mates with A24J2.
7, and 8)
A23P2 (8) mates with A24J14.
W1P1 (7) mates with A24J1.
10. 10 sets of screws
Loosely install all screws and
(3) and washers
washers and then
(4)
tighten.
11. 8 fasteners (2)
Tighten
12. Rack power
Turn on
13. POWER CB (1)
Set to ON. Check that fault
a.
If fault has been corrected,
which caused front panel removal
TD-1337(V)/G is operational.
has been corrected.
b. If fault still exists, perform next action
as directed in troubleshooting proce-
dures (para 2-9).
2-43
