TM 11-7025-221-20
2-18. Plug-In Card Replacement Instructions - Continued.
Location/Item
Action
Remarks
Installation - Continued
Inspect pads (8) and gasket (9).
Perform following checks and notify next
9. Top cover (5)
higher level of maintenance of any prob-
lems.
1. Check that there are no rips, tears,
or missing chunks of gasket or pad.
2. Check that bonded surfaces of gasket
and pads are not pulled away from
cover surface.
Install
10. Top cover (5)
Place cover on TD-1337(V)/G and tighten
20 fasteners (6).
11. TD-1337(V)/G
close
Release locks (4). Use handles (3) and
push TD-1337(V)/G into rack.
12. 8 fasteners (2)
Tighten
2-38
