TM 11-7025-221-20
2-22. Display Card Replacement
Instructions.
This task covers:
b. installation
a. Removal
Personnel Required: 1
INITIAL SETUP
Tactical Satellite Microwave System Operator
Applicable Configurations
MOS 26Q
All models
Equipment Condition
Tools
Front panel removed from TD-1337(V)/G (para
Cross-tip screwdriver, No. 2
Hex socket wrench, 3/6-inch opening
General Safety Instructions
Hex socket wrench, 5/16-inch opening
None
Torque wrench with 3/8-inch and 5/16-inch
sockets
Remarks
Action
Location/Item
Removal
1. Retain all hardware removed in this
1. 3 sets of screws
Remove
and following steps.
and washers
2. These are screws in capacitor bracket
(1 thru 3)
(17).
These are rest of screws in display
Remove
2. 5 sets of screws
card A23A1 (28).
and washers
(4 thru 6)
Retain cable W 1.
Disconnect
3. Connector (7)
4. Connector (8)
Disconnect
Do not unsolder terminal lugs (11
Remove
5. 2 sets of nuts,
and 15).
washers, and
terminal lugs
(9 thru 16)
Remove
6. Capacitor bracket
(17)
Remove
7. 2 sets of screws,
nuts, washers,
and terminal
lugs (18 thru
27)
Remove
8. Display card (28)
2-44
