TM 11-7025-221-10
2 - 2 8 . Generate Local Mux Configuration Routine (V3/V4 Models) - Continued.
Local Mux Configuration Routine (V3/V4 Models) - Continued
Operator action/message display
Step
13
At each port selected by prompt, press q key and then press ENTR key. Go to step 15.
14
Press q key and then press ENTR key.
NOTE
Go to step 16 if following message is not displayed. (Message is displayed
if "2" was entered in step 7.)
15
Press q key and then press ENTR key.
NOTE
Go to step 17 if following message is not displayed. (Message is displayed
if "1" was entered in step 12.)
16
Press q key and then press ENTR key.
2-74