TM 11-7025-221-10
1-27. Configuration Routines - Continued.
NOTE
Refer to the illustration on page 1-32 when reading the following
material.
5. Rmux Configuration for Downloading. This routine provides all configuration data necessary
to configure the mux of one remote TD-1337(V)/G operating as a non-nodal. The routine
also provides the configuration data to configure your local demux that services that remote
TD-1337(V)/G. Due to differences between models, two separate Rmux configuration for down-
loading procedures are provided. One procedure for V1/V2 models and another procedure
for V3/V4 models.
. Transmit Configuration Routines. There are three transmit configuration routines. These routines
are used to transmit configuration data from your TD-1337(V)/G to other TD-1337(V)/G's.
1. Download Standby. This routine downloads the contents of NVM in a TD-1337(V)/G to a
standby TD-1337(V)/G in the same shelter. The standby TD-1337(V)/G must be in the inactive
mode to receive the download. The TD-1337(V)/G transmitting the download can be in any
operating mode.
2. Download Local Configuration. This routine selects and transmits the local mux configuration
in memory 1 or memory 2 of your TD-1337(V)/G to remote TD-1337(V)/G's in network. Your
TD-1337(V)/G must be operating in either preliminary, memory 1, or memory 2 mode to perform
a download local configuration. At each remote TD-1337(V)/G, the downloaded data configures
the demux that processes the SG from your TD-1337(V)/G.
3. Download to Non-/Vodal. This routine selects and transmits local mux configuration and Rmux
download configuration data in memory 1 or memory 2 of your TD-1337(V)/G to a selected
remote TD-1337(V)/G operating as a non-nodal. Your TD-1337(V)/G must be operating in either
preliminary, memory 1, or memory 2 mode to perform a download to non-nodal routine. At
selected remote TD-1337(V)/G, the downloaded data configures its mux and demux.
CT Key. This key activates the receive control telemetry configuration routine. The routine accepts
or aborts a download local configuration or a download to non-nodal configuration that has been
transmitted to your memory 1 or memory 2 from a remote TD-1337(V)/G. You cannot accept download
data to a given memory if you are operating in that memory mode.
1-34
