TM 11-7025-221-34 P/TO 31S5-2G-254/TM-08467 A-34/5
NOTE
Code
Application/Explanation
When a stock numbered item is requisi-
F-- The lowest maintenance level capable of com-
tioned, the repair part received may have a
plete repair of the support item is the direct
different part number than the part being
support level.
replaced.
H-- The lowest maintenance level capable of com-
plete repair of the support item is the general
f. Description. Indicates the Federal item name
support level.
and, if required, a minimum description to identify
D The lowest maintenance level capable of com-
the item. In the Special Tools List, the initial basis of
plete repair of the support item is the depot
issue (BOI) appears as the last line in the entry for
level.
each special tool, special TMDE, and other special
Z Nonreparable. No repair is authorized.
support equipment. When density of equipments
supported exceeds density spread indicated in the
(3) Recoverability code. Recoverability codes
basis of issue, the total authorization is increased
are assigned to support items to indicate the disposi-
accordingly.
tion action on unserviceable items. The recoverabil-
g. Unit of Measure (U/M). Indicates the standard
ity code is entered in the fifth position of the Uniform
SMR Code format as follows:
of the basic quantity of the listed item as used in
performing the actual maintenance function. This
measure is expressed by a two-character alphabetical
Recoverability
codes
Definition
abbreviation (e.g., ea, in, pr, etc). When the unit of
Z-- Nonreparable item. When unserviceable, con-
measure differs from the unit of issue, the lowest unit
demn and dispose at the level indicated in posi-
of issue that will satisfy the required units of mea-
tion 3.
sure will be requisitioned.
F-- Reparable item. When uneconomically repara-
h. Quantity Incorporated in Unit. Indicates the
ble, condemn and dispose at the general sup-
quantity of the item used in the breakout shown on
port level.
the illustration figure, which is prepared for a func-
H Reparable item. When uneconomically repara-
tional group, subfunctional group, or an assembly. A
ble, condemn and dispose at the general sup-
"V" appearing in this column in lieu of a quantity
port level.
indicates that no specific quantity is applicable, (e.g.,
D-- Reparable item. When beyond lower level repair
shims, spacers, etc).
capability, return to depot. Condemnation and
4. Special Information
disposal not authorized below depot level.
L-- Reparable item. Repair, condemnation, and dis-
a. Usable on codes are shown in the description
posal not authorized below depot/specialized
column. Uncoded items are applicable to all models.
repair activity level.
Identification of the usable on codes used in this
A Item requires special handling or condemnation
publication are:
procedures because of specific reasons (i.e.,
Used on
Code
precious metal content, high dollar value, criti-
ELC
TD-1337(V)1/G
cal material or hazardous material). Refer to
ELD
TD-1337(V)2/G
appropriate manuals/directives for specific in-
ELE
TD-1337(V)3/G
structions.
ELF
TD-1337(V)4/G
b. The following publications pertain to the
c. National Stock Number. Indicates the National
TD-1337(V)/G and their components:
stock number assigned to the item and will be used
TM 11-7025-221-10, Multiplexer, Digital
for requisitioning purposes.
TD-1337(V)/G
d. Federal Supply Code for Manufacturer (FSCM).
TM 11-7025-221-20, Multiplexer, Digital
The FSCM is a 5-digit numeric code listed in SB
TD-1337(V)/G
708-41/42 which is used to identify the manufac-
TM 11-7025-221-20P Multiplexer, Digital
turer, distributor, or Government agency, etc.
e. Part Number. Indicates the primary number
TD-1337(V)/G
TM 11-7025-221-34, Multiplexer, Digital
used by the manufacturer (individual, company,
TD-1337(V)/G
firm, corporation, or Government activity), which
c. National stock numbers (NSN's) that are miss-
controls the design and characteristics of the item by
ing from P source coded items have been applied for
means of its engineering drawings, specifications,
standards, and inspection requirements to identify
an item or range of items.
2
Change 1
