TM
11-7025-221-20P/TM-08467A-20/4
h. Quantity Incorporated in Unit. Indicates the
action on unserviceable items. The recoverability
quantity of the item used in the breakout shown on
code is entered in the fifth position of the Uniform
the illustration figure, which is prepared for a
SMR Code format as follows:
functional group, subfunctional group, or an assem-
Recoverability
bly. A "V" appearing in this column in lieu of a
Codes
Definition
z
-- Nonreparable item. When un-
quantity indicates that no specific quantity ia appli-
cable, (e.g., shims, spacers, etc).
serviceable, condemn and dis-
pose at the level indicated in
4. Special Information
position 3.
F
-- Reparable item. When un-
a. Usable on codes are shown in the description
economically reparable, con-
column. Uncoded items are applicable to all models.
demn and dispose at the direct
Identification of the usable on codes used in this
support level.
publication are:
-- Reparable item. When un-
H
economically reparable, con-
Used on
Code
demn and dispose at the general
TD-1337(V)1/G
ELC
support level.
TD-1337(V)2/G
ELD
L
-- Reparable item. Repair, condem-
TW1337(V)3/G
ELE
nation, and disposal not autho-
TD-1337(V)4/G
ELF
rized below depot/specialized re-
b. The following publications pertain to the
pair activity level.
TD-1337(V)/G and their components:
c. National Stock Number. Indicates the National
TM 11-7025-221-10, Multiplexer, Digital
stock number assigned to the item and will be used
TD-1337(V)/G (To be published)
for requisitioning purposes.
TM 11-7025-221-20, Multiplexer, Digital
d. Federall Supply Code for Manufacturer (FSCM).
TD-1337(V)/G (To be published)
The FSCM is a 5-digit numeric code listed in SB
c. National stock numbers (NSN's) that are miss-
708-41/42 which is used to identify the manufactur-
ing from P source coded items have been applied for
er, distributor, or Government agency, etc.
and will be added to this TM by future change/
e. Part Number. Indicates the primary number
revision when they are entered in the Army Master
used by the manufacturer (individual, company,
Data File (AMDF). Until the NSN's are established
firm, corporation, or Government activity), which
and published, submit exception requisitions to:
controls the design and characteristics of the item
Commander, US Army Communications-Electron-
by means of its engineering drawings, specifica-
ics Command and Fort Monmouth, ATTN:
tions, standards, and inspection requirements to
DRSEL-MM, Fort Monmouth, NJ 07703 for the
identify an item or range of items.
part required to support your equipment.
d. The illustrations in this manual are identical
NOTE
to those published in TM 11-7025-221-34P. Only
When a stock numbered item is requisi-
those parts assigned the third position SMR mainte
tioned, the repair part received may have a
nance code "C" or "O" are listed in the tabular
different part number than the part being
listing. Only illustrations containing organizational
replaced.
authorized items appear in this manual.
f. Description. Indicates the Federal item name
5. How to Locate Repair Parts
and, if required, a minimum description to identify
a. When National stack number or part number
the item.
is unknown.
g. Unit of Measure (U/M). Indicates the standard
(1) First. Using the table of contents, determine
of the basic quantity of the listed item as used in
the functional group within which the item belongs.
performing the actual maintenance function. This
This is necessary since illustrations are prepared
measure is expressed by a two-character alphabeti-
for functional groups and listings are divided into
cal abbreviation (e.g., ea. in, pr, etc). When the unit
the same groups.
of measure differs from the unit of issue, the lowest
(2) Second. Find the illustration covering the
unit of issue that will satisfy the required units of
functional group to which the item belongs.
measure will be requisitioned.
2
