TM 11-5820-880-12
APPENDIX C
COMPONENTS OF END ITEM LIST AND BASIC ISSUE ITEMS LISTS
SECTION I
INTRODUCTION
These items, when assembled, comprise the 2- through 5-channel multiplexer and must
accompany them whenever they are transferred or turned in. The illustration will help you identify
these items.
This Components of End Item List is divided into the following sections:
a. Section Il. Integral Components of the End Item.
These items, when assembled, comprise the 2- through 5-channel multiplexer and must
accompany them whenever they are transferred or turned in. The illustration will help you identify
these items.
b. Section Ill. Basic Issue Items. Not applicable.
a. Illustration. This column is divided as follows:
(1) Figure number. Indicates the figure number of the illustration on which the item is shown.
(2) Item number. The number used to identify item called out in the illustration.
b. National Stock Number. Indicates the National Stock number assigned to the item and
which will be used for requisitioning.
c. Description. Indicates the Federal item name and, if required, a minimum description to
identify the item. The part number indicates the primary number used by the manufacturer, which
controls the design and characteristics of the item by means of its engineering drawings,
specifications, standards, and inspection requirements to identify an item or range of items.
Following the part number, the Federal Supply Code for Manufacturers (FSCM) is shown in
parentheses.
d. Location. If the physical location is necessary to help you inventory each major item, it will
be listed in this column.
e. Usable on Code. Not applicable.
f. Quantity Required (Qty Reqd). This column lists the quantity of each item required for a
complete major item.
g. Quantity. This column is left blank for use during an inventory. Under the Rcvd column, list
the quantity you actually receive on your major item. The Date columns are for your use when
you inventory the major item.
C-1