3-4. Activate Loopback Option Procedure - Continued.
Demux Loopback Procedures - Continued
Operation Action/Message Displayed
Press CLR key to clear display.
3-5. Terminate Loopback Option Procedures.
Perform the following procedures to remove the Ioopback option and place the TD-1337(V)/G back in the
primary mode of operation.
Terminate Loopback Option
Notify local users and remote TD-1337(V)/G's in network:
q Traffic flow is going to be interrupted while mode change routine is performed.
q ocal user's associated with demux('s) that were in Ioopback will now receive normal traffic
flow from TD-1337(V)/G. (Supergroup inputs from modems will now be processed.)
Perform system mode change (para 2-11) and change from alternate memory to primary memory
mode of operation.
TD-1337(V)/G is now operating in system configuration that was being used
before Ioopback option was performed.
If alternate memory contained valid configuration data before Ioopback option was used, perform
the appropriate local mux and Rmux configuration routines to enter data back in alternate memory.