2-24. Generate Orderwire Configuration Routine - Continued.
Orderwire Configuration Routine
Operator action/message display
Press FUNC key (one or two times) until SELECT FUNCTION is displayed, Then press
ORDERWIRE CONF key.
ORDW CONFIG SELECTION >
DISPLAY= 1 GENERATE=2
Press "2" key and then press ENTER key,
Perform steps a through c for local TD-1337(V)/G. Then perform steps a and b for local CNCE.
a. Press CLR key, enter assigned terminal number, and then press ENTR key.
b. Press CLR key, enter assigned call number, and then press ENTR key.
c. Press "1" (secure) or "2" (non-secure) key and then press ENTR key. (When configuring
a CNCE, secure is automatically assigned.)
Perform a, b, and c as directed in step 3 above for each remote message display.
VERIFY MEMORY LOADING
ACCEPT= 1 ABORT=2
Press "1" key and then press ENTR key.
END OF ORDERWIRE CONFIGURATION
Check that above message is displayed. Then press CLR key to clear display.