TM 11-5820-880-12
In the 2-channel multiplexer, which uses two
transceivers and one antenna, a coaxial (coax),
such as RG-58 or equivalent, is connected from
the antenna receptacle of one transceiver to the
coax receptacle on the rear of either band-pass
filter. The coax from the second transceiver
antenna receptacle is then connected to the
coax receptacle on the rear of the other band-
pass filter. The coax, such as RG-213 or
equivalent, from the antenna output connector
on the coupler is connected to the AS-3166 (part
of OE-254/GRC group) wide-band antenna or
equivalent. The 5-channel multiplexer hookup is
similar to the 2-channel hookup except that the
5-channel uses from three to five transceivers.
2-4