TM 11-5805-694-23P/TO 31W2-4-287-14
models. Identification of the usable on codes used in this
Recoverability
publication are:
Code
Definition
Code Used on
Z
- Nonreparable item.
When unserviceable,
EPV
OB-84/FCC-97
condemn and dispose at the level indicated in
EPW OB-84/FCC-97(V)1
position 3.
EPX
OB-84/FCC-97(V)2
D
- Reparable item. When beyond lower level
EPY
OB-84/FCC-97(V)3
repair
capability,
return
to
depot.
EPZ
OB-84/FCC-97(V)4
Condemnation and disposal not authorized
EPS
SA-2127/FCC-97(V)
below depot level.
EPT
SA-2343/FCC-97(V)
A
- Item requires special handling or condemnation
EPU
OP-129/FCC-97(V)
procedures because of specific reasons (i.e.,
precious metal content, high dollar value,
b. The following publication pertains to the
critical material or hazardous material). Refer
AN/FCC-97 through AN/FCC-97(V)4 and its components:
to appropriate manuals/directives for specific
TM 11-5805-694-14, Multiplexer Set AN/FCC-97.
instructions.
c. National stock numbers (NSN's) that are
c. National Stock Number.
Indicates the
missing from P source coded items have been applied for
and will be added to this TM by future change/revision
National stock number assigned to the item and will be
when they are entered in the Army Master Data File
used for requisitioning purposes.
(AMDF). Until the NSN's are established and published,
d. Federal Supply Code for Manufacturer
submit exception requisitions to: Commander, US Army
(FSCM. The FSCM is a 5-digit numeric code listed in
Command
and
Fort
SB 708-41/42 which is used to identify the
Monmouth, ATTN:
DRSELMM, Fort Monmouth, New
manufacturer, distributor, or Government agency, etc.
Jersey 07703 for the part required to support your
e. Part Number.
Indicates the primary
equipment.
number used by the manufacturer (individual, company,
firm, corporation, or Government activity), which
5.
How to Locate Repair Parts
controls the design and characteristics of the item by
a. When National stock number or part number is
means of its engineering drawings, specifications,
unknown.
standards, and inspection requirements to identify an
(1) First.
Using the table of contents,
item or range of items.
determine the functional group within which the item
belongs. This is necessary since illustrations are prepared
NOTE
for functional groups and listings are divided into the same
When a stock numbered item is
groups.
requisitioned,
the
repair
part
(2) Second Find the illustration covering the
received may have a different part
functional group to which the item belongs.
number than the part being replaced.
(3) Third Identify the item on the illustration
and note the illustration figure and item number of the item.
f.
Description Indicates the Federal item
(4) Fourth. Using the Repair Parts Listing,
name and, if required, a minimum description to identify
find the figure and item number noted on the illustration.
the item.
b. When National stock number or part number is
g. Unit of Measure (U/M].
Indicates the
known.
standard of the basic quantity of the listed item as used
(1) First. Using the Index of National Stock
in performing the actual maintenance function. This
Numbers and Part Numbers, find the pertinent National
measure is expressed by a two-character alphabetical
stock number or part number. This index is in NIIN
abbreviation (e.g., ea, in, pr, etc.). When the unit of
sequence followed by a list of part numbers in
measure differs from the unit of issue, the lowest unit of
alphanumeric sequence, cross-referenced to the illustration
issue that will satisfy the required units of measure will
figure number and item number.
be requisitioned.
(2) Second, After finding the figure and item
h. Quantity Incorporated in Unit. Indicates the
number, locate the figure and item number in the repair
quantity of the item used in the breakout shown on the
parts list.
illustration figure, which is prepared for a functional
group, subfunctional group, or an assembly.
6.
Abbreviations
Not applicable.
4.
Special Information
a. Usable on codes are shown in the
description column. Uncoded items are applicable to all
(Next printed page is 4)
2